Administrator Information > Advanced Security Settings > Controlling Using Protocols SLP Settings WSD Settings LLTD Settings LLMNR Settings SNMPv1/v2c Settings SNMPv3 Settings 211 Items Setting value and Description Wide-Area Bonjour Set whether to use Wide-Area Bonjour. Items Setting value and Description Enable SLP Select this to enable the SLP function. This is used such as network searching in EpsonNet Confgi . Items Setting value and Description Enable WSD Select this to enable adding devices using WSD and scan from the WSD port. Scanning Timeout (sec) Enter the communication timeout value for WSD scanning between 3 to 3,600 seconds. Device Name Displays the WSD device name.
Location Displays the WSD location name. Items Setting value and Description Enable LLTD Select this to enable LLTD. The scanner is displayed in the Windows network map. Device Name Displays the LLTD device name. Items Setting value and Description Enable LLMNR Select this to enable LLMNR. You can use name resolution without NetBIOS even if you cannot use DNS. Items Setting value and Description Enable SNMPv1/v2c Select to enable SNMPv1/v2c. Access Authority Set the access authority when SNMPv1/v2c is enabled. Se- lect Read Only or Read/Write. Community Name (Read Only) Enter 0 to 32 ASCII (0x20 to 0x7E) characters. Community Name (Read/Write) Enter 0 to 32 ASCII (0x20 to 0x7E) characters.