Administrator Information > Advanced Security Settings > Encrypted Communication Using IPsec/IP Filtering *1If IPsec is selected for Access Control , you cannot specify in a prefix length. *3Except IPv6 link local addresses. *2If IPsec is selected for Access Control , you can select a link-local address (fe80::) but group policy will be disabled. Related Information & “Running Web Config on a Web Browser” on page 26 References of Service Name on Group Policy Note: Unavailable services are displayed but cannot be selected.
228 Setting of Remote Address(Host) IPv4*1 ✓ – ✓ IPv6*1*2 – ✓ ✓ Blank ✓ ✓ ✓ Service Name Protocol type Local port number Remote port number Features controlled Any – – – All services ENPC UDP 3289 Any port Searching for a scanner from applications such as Epson Device Admin and the a scanner driver SNMP UDP 161 Any port Acquiring and confgi uring of MIB from applications such as Epson Device Admin and the Epson scanner driver WSD TCP Any port 5357 Controlling WSD WS-Discovery UDP 3702 Any port Searching for a scanner from WSD Network Scan TCP 1865 Any port Forwarding scan data from Epson ScanSmart Network Push Scan Discovery UDP 2968 Any port Searching for a computer from scanner Network Push Scan TCP Any port 2968 Acquiring job information of push scanning from Epson ScanSmart HTTP (Local) TCP 80 Any port HTTP(S) server (forwarding data of Web Config and WSD) HTTPS (Local) TCP 443 Any port HTTP (Remote) TCP Any port 80 HTTP(S) client (firmware updating and root certifci ate updating) HTTPS (Remote) TCP Any port 443