SC-B9580 User's Guide Appendix C Disconnect the power cable and the computer communication cable from the printer. F Remove the media support. D Remove media from the media feeding unit and the auto take-up reel unit. E Unlock all of the casters. Unlock the two casters at the front of the printer and the two at the front of the bulk ink solution. Preparing to move when there are bumps or A c Important: Remove media from the media feeding unit and the auto take-up reel unit. When performing level adjustment using the levelers, make sure you raise the levelers above the casters before trying to move the printer. Moving the printer without raising the levelers could cause a malfunction.
You need the spanner supplied to adjust the levelers. B Turn the printer on. C Press (Maintenance), and then press Move/Transport . D Follow the on-screen instructions to drain the ink from the printer. (1) Loosen the nut on the top of the levelers. (2) Turn the nut on the bottom counter-clockwise. E Go to the back of the printer and remove the waste ink bottle. (3) Check that it is above the caster. U “Replacing the Waste Ink Bottle” on page 66 F Turn off the printer. G Disconnect the power cable and the computer communication cable from the back of the printer. 111 Pr ga