SC-B9580 User's Guide Control Panel Menu 87 Item Parameter Explanation Job Connection On* When On is set, the next job starts printing without feeding media, drying, or rewinding between continuous print jobs. There are no operations between jobs so printing time is that much shorter. Continuous print jobs are a series of jobs in which the print job data is sent from the computer to the printer as soon as the previous print job data has been sent from the computer and received by the printer. If the pass mode is different between the previous print job and the next print job, the jobs are not connected.
Off Information Printing On When this is turned On, a mark and the nozzle check pattern are printed on the end of the media, so it is easier to check print quality. Margin Between Images: Set the interval between images and the marks and check patterns. Print Position: Set Next to the Image to print in the position open between the margin between images using the edge of images as a reference. Set Media End to print in the position using the edge of the media as a reference. Event Marking: When this is turned On, a mark is printed when an event that affects print quality occurs while printing. This makes it easier to find poor quality areas during and after printing.
The following events cause a mark to be printed. ❏ Change in state of clogged nozzles: When there is a change in nozzle clog conditions after printing starts ❏ Head cleaning: When head cleaning is executed manually ❏ Automatic head cleaning: When automatic head cleaning is executed ❏ Head striking: When the striking of the media and print head is detected ❏ Suspension: When printing is suspended ❏ Start of nozzle compensation Set a position, in which marks are easy to check, in Print Position. Nozzle Check Pattern: When pattern selection is Normal or Paper Width Saving, the nozzle check pattern prints continuously during printing.
When printing print jobs continuously or when printing a long job, you can immediately know if nozzles have clogged while printing. The width of the check pattern is narrower than Normal when Paper Width Saving is set, so the image print area is wider. Set a position, in which check patterns are easy to check, in Print Position. When Ink Density is set to Dark, check patterns are easy to check. Margin Between Images 5 to 999 mm (5*) (0.20 to 39.33 in.
[0.20*]) Print Position Next to the Image* Media End Event Marking Off* On Print Position Left* Right Left and Right Nozzle Check Pattern Pattern Selec- tion Do Not Print Normal* Paper Width Saving Print Position Left* Right Left and Right Ink Density Standard* Dark Off*