,,,,, , =,=, ,,, ,= , H,,=, H, i,= ,=, =,,,,,,,,, , ,,, =J,,,,,,,,,,,,,,,,,,, , OPERATION = = ,,,,,,,,ll ,,= KNOW YOUR SNOW THROWER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER. Compare the illustrations with your snow thrower to familiarize yourself with the location of various controls and adjustments Save this manual for future reference, AUGER DRIVE TRACTION DRIVE LEVER LEVER LEVER CHUTE DEFLECTOR WE_HT PRIMER BUTTON ELECTRIC DISCHARGE CHUTE BUTTON IGNITION KEY RECOIL STARTER HANDLE CHOKECONTROL THRO'I'TLE CONTROL SCRAPER BAR FIG. 9 ,,,,,, ,,,,, ,,,, , ,,,, uu,, u ,, ,,,,,,,,,,,,,,,,, ,,,, .............................................
SEARS TRAC-PLUS SNOW THROWERS conform to the safety standards of the American National Standards Institute. Au E'R...................................... G DRIVE LEVER - Starts and stops the auger and impelIer (snow gathering and throwing), TRACTION DRIVE LEVER _Propels the snow thrower lorward and in reverse. SPEED SHIFTER LEVER - Selects the speed of the snow thrower (6 speeds torward and 2 speeds reverse) HEADLIGHT - Turns on whenever the engine is running CRANK ASSEMBLY - Changes the direction of snow throwing through the discharge chute.
CHUTE DEFLECTOR - Changes the distance the snow is thrown_ DISCHARGE CHUTE - Changes the direction the snow is thrown =,= = ,=== =,,=lLIJ WEIGHT TRANSFER PEDAL- Engage for heavy snow conditions, to keep the snow thrower from climbing drifts and hard-packed snow When released, it eases trans- port of the snow thrower. HEIGHT ADJUST SKIDS -Adjusts the ground clearance of the auger housing. IGNITION KEY - Must be inserted to start the engine. ELECTRIC STARTER BUTTON - Used to start the en- gine using the 120 V electric starter.
RECOIL STARTER HANDLE - Starts the engine manu- ally, CHOKE CONTROL - Used to start a cold engine PRIMER BUTTON - Injects the fuel directly into the carburetor or mainfold for fast starts in cold weather THROTTLE CONTROL - Controts the engine speed !1