Left side cover To remove the left side cover 1 Open the drum drawer (top drawer) and remove the imaging drum, protecting it from light. 2 Remove the top cover. CAUTION Exposure to light for more than 15 seconds can seriously damage the imaging drum. 3 Open the ITB drawer (middle drawer) and Tray 2. 4 Remove the two screws as shown in callout 1 of figure 6-3. 5 Carefully pull out the bottom of the left cover, disengage the two tabs located behind the cover (see callout 2 of figure 6-3), and then lift the cover up and off. CAUTION Be careful to not break the tabs when pulling out the bottom of the cover.
2 1 Figure 6-3 Left side cover removal and replacement C7085-90921 Chapter 6 Removal and replacement 145