Table 7-6. Numerical Printer Messages (continued) Control Panel Message Event Log Message Explanation Recommended Action 53.XY.ZZ PRINTER ERROR There is a memory error with an accessory. The DIMM that caused the error will not be used. Values of X , Y , and ZZ are as follows: X = DIMM type 0 = ROM 1 = RAM 1. Turn the printer off, and reseat or replace the specified DIMM. 2. Try the DIMM in another slot. 3. Replace the DIMM that caused the error.
Y = Device location 0 = internal memory (ROM or RAM) 1 to 4 = DIMM slots 1, 2, 3, or 4 ZZ= Error number 0 = Unsupported memory 1 = Unrecognized memory 2 = Unsupported memory size 3 = Failed RAM test 4 = Exceeded maximum RAM size 5 = Exceeded maximum ROM size 6 = Invalid DIMM speed 7 = DIMM reporting information incorrectly 8 = DIMM RAM parity error 9 = ROM needs to be mapped to an unsupported address 10 = DIMM address conflict 11 = PDC XROM out of bounds 12 = Unable to make a temporary mapping Troubleshooting the Printing System 7-37