3 Remove five screws (callout 1). 21 Figure 60. Removing the formatter (2 of 3) 4 Rotate the bottom of the formatter up and off of the hooks on the chassis and begin to remove it. After removing the bottom of the formatter, disconnect the two flat flexible cables from connectors at the top of the formatter, and unplug the scanner motor cable from the formatter (callout 1). 21 Figure 61. Removing the formatter (3 of 3) To reinstall When you reconnect the bottom cable, make sure you lock the ZIF connector at the bottom of the formatter back into place. EN Printer assemblies 143