Fuser assembly 1 Separate the scanner from the printer (see pages 113 through 118) and remove the left side door, back cover, and printer top cover (pages 129, 130, and 132). 2 Remove two screws (callout 1) from the right fuser support plate. 3 Remove a third screw (callout 2) from behind the large gear on the right fuser plate and remove it. Note You can access the third screw through the holes in the 69T gear. If you need to realign the 69T gear, you must first remove the pressure roller gear. Release the tab (callout 3) and remove the pressure roller gear. 2 1 2 2 23 Figure 62. Removing the fuser assembly (1 of 4) 144 Chapter 5 - Removal and replacement EN