The table below provides a more detailed description of the NVRAM PJL factory variables and commands and shows possible settings for each. Figure 104. NVRAM PJL factory variables To use these commands, you need some method to send PJL commands to the product, either with a software tool or by copying a file that contains the commands from the host using a DOS box. For example, from the DOS prompt: copy /b filename lpt1 Here is an example of a file that uses one of the commands: ESC%-12345X@PJL SET SERVICEMODE=HPBOISEID @PJL ‘command’ @PJL RESET Here is an example of using the NVRAMINIT command:
ESC%-12345X@PJL SET SERVICEMODE=HPBOISEID @PJL NVRAMINIT @PJL RESET 234 Chapter 6 - Troubleshooting EN NVRAM PJL Variable or Command Possible settings DEFAULT PAPER "LETTER", "LEGAL, "A4", "EXECUTIVE”, "COM10”, "MONARCH”, "DL”, "C5”, "B5", "CUSTOM" DEFAULT LPARM:PCL SYMSET "ROMAN8", "ISOL1", "ISOL2", "ISOL5", "PC8", "PC8DN", "PC850", "PC852", "PC8TK", "WINL1", "WINL2", "WINL5", "DESKTOP", "PSTEXT", "VNINTL", "VNUS", "MSPUBL", "MATH8", "PSMATH", "VNMATH", "PIFONT", "LEGAL", "ISO4", "ISO6", "ISO11", "ISO15", "ISO17", "ISO21", "ISO60", "ISO69", "WIN30" DEFAULT OEM “ON”, “OFF” DEFAULT PRINTPAGECOUNT 0-2147483647 DEFAULT SCANPAGECOUNT 0-2147483647 DEFAULT COPYPAGECOUNT 0-2147483647 CLEARNVRAM None - Command NVRAMINIT None - Command