Removing and replacing the control panel bezel 1 Unplug the power cord from the product. If you have a 220V product, turn off the power switch. 1 2 Remove the existing control panel or buttons inside the exposed control 4 Press down until all the snaps are engaged, and then press outward until the bezel is secured. 5 Plug the product in to turn it back on. If you have a 220V product, turn on the power switch. EN Removing and replacing the control panel bezel 71 2 3 panel area. 3 Align the new bezel at the lower notch. The bezel notch should align to the inside of the product. 4