Appendix-1 Parameter List AppAppendix Appendix-1 Parameter List Monitor Mode (d ††† ) / Basic Function Mode (F ††† ) Appendix App-1 Parameter No. Name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Set value d001 Output frequency monitor 0.0 to 400.0 ⎯ ⎯ Hz d002 Output current monitor 0.0 to 999.9 ⎯ ⎯ A d003 Rotation direction monitor F: Forward o: Stop r: Reverse ⎯ ⎯ ⎯ d004 PID feedback value monitor 0.00 to 99.99 100.0 to 999.9 1000. to 9999. (Enabled when the PID function is selected) ⎯ ⎯ ⎯ d005 Multi-function input monitor Example) Terminal ON OFF S4, S2: ON Terminal S5 S4 S3 S2 S1 S5, S3, S1:
OFF ⎯ ⎯ ⎯ d006 Multi-function output monitor Example) ON Terminal P1: ON OFF Terminal MA: OFF MA P1 ⎯ ⎯ ⎯ d007 Output frequency monitor (after conversion) 0.00 to 99.99 100.0 to 999.9 1000. to 9999. 1000 to 3996 (10000 to 39960) (Output frequency × Conversion factor of b086) ⎯ ⎯ ⎯ d013 Output voltage monitor 0. to 600. ⎯ ⎯ V d016 Total RUN Time 0. to 9999. 1000 to 9999 ⎡100 to ⎡999[h] ⎯ ⎯ h d017 Power ON time monitor 0. to 9999. 1000 to 9999 ⎡100 to ⎡999[h] ⎯ ⎯ h d018 Fin temperature monitor 0.0 to 200.0 °C d080 Fault frequency monitor 0. to 9999.
⎯ ⎯ ⎯ d081 Fault monitor 1 (Latest) Error code (condition of occurrence) → Output frequency [Hz] → Output current [A] → Internal DC voltage [V] → RUN time [h] → ON time [h] ⎯ ⎯ d082 Fault monitor 2 d083 Fault monitor 3