Recommended value for setting the barcode/2D symbol font (2D symbol of matrix type) - : Not supported. * 1 : Whether paper feed is performed during printing 2D symbol can be checked in [ Display Media Feed Position ] - [ Display Print Preview ] in the Print Preview function. For this function, see "Print Preview" on page 182 . *2: Only QRCode is confirmed. 3 Click [ Add ]. The selected 2D symbol font is saved and the font name is added to the font list. The 2D symbol font can be registered up to 30. The 2D symbol font setting can be overwritten by clicking [Save] after selecting the font name from the font list and changing the setting.
The 2D symbol font setting can be deleted by clicking [Delete] after selecting the font name from the font list. Test print is executed according to the setting by clicking [Print] after inputting the text in the box.
176 Symbol Category Print Quality Print Status (*1) Minimum Cell Size [by 360 dpi] ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher AztecCode QRCode Plain Media, Plain Media Label Speed No Paper feed 6 dot - - With Paper feed 8 dot - - Quality No Paper feed 6 dot - - With Paper feed 8 dot - - Fine Media, Fine Media Label, Synthetic Media Label, PET Film Speed No Paper feed 5 dot 6 dot (*2) With Paper feed 6 dot 7 dot - Quality No Paper feed 5 dot 6 dot (*2) With Paper feed 6 dot 7 dot -