Appendix For Ethernet interface Communication specifications 10BASE-T/100BASE-TX For Wi-Fi Interface (With OT-WL06) (For Device charging model/Bluetooth model) • Countries and regions where Wi-Fi can be used are limited. Since notes are provided for each country, check the sheet supplied with the product. • When using wireless LAN, make sure you disconnect the LAN cable. If a LAN cable is connected, wireless LAN is disabled. Specification • IEEE802.11b/g/n (2.4 GHz band) or IEEE802.11a/b/g/n/ac (2.4 GHz or 5 GHz band) compliant Wi-Fi communication compatible. • Support the IP address automatic acquisition function (DHCP, APIPA). • Infrastructure mode is supported.
Communication Standard • IEEE802.11b (2.4 GHz) • IEEE802.11g (2.4 GHz) • IEEE802.11n (2.4 GHz) • IEEE802.11a (5 GHz) • IEEE802.11n (5 GHz) • IEEE802.11ac (5 GHz) Security Security can be selected from among the following: • WPA-PSK(AES) • WPA2-Personal • WPA2-Enterprise Initial settings These settings apply when the printer is initialized in the Interface Setup mode. ∗ You can connect to a WPA2-PSK (AES) access point using the settings above. 136 Parameter Setting value Communication standard 802.11b/g/n Network mode Infrastructure mode SSID EPSON Printer _ Encryption type WPA2-Personal Passphrase EpsonNet IP Address Automatically acquired by DHCP