Appendix Default Password for Setup / Default Passphrase for SimpleAP The default password and the passphrase are as follows: The password label is attached at the location shown below. The serial number is on the nameplate attached at the location shown below. Nameplate Password label You can also find the serial number on the self-test printed sheet and on the "SimpleAP Start" sheet. On the "SimpleAP Start" sheet, the last 10 digits of the SSID is the serial number. If the password label is lost, the default password can be checked by printing the status sheet.
(A sample status sheet is shown to the right.) If there is no password on the status sheet, the default password is a serial number. To improve security, it is recommended to change the administrator password from the default password. The password can be changed from [Password] in the [Optional] menu of EpsonNet Config (web version). It can also be changed using TM-L100 Utility or Epson TM Utility. 138 Password label Password / Passphrase Attached to the product Printed on the label Not attached to the product Serial number (10-digit alphanumeric characters, case-sensitive) * * * Wi-Fi & Ethernet Interface * * * Wi-Fi Status MAC Address : Unmounted : : Ethernet Status MAC Address :
XX-XX-XX-XX-XX-XX : : Network Soft Version : XX.XX(XXXX.XX.XX) TCP/IP Status Acquiring : Auto : : Service Status Time Server : : Other Status Date/Time : 20XX/XX/XX XX:XX:XX Wi-Fi Device ID : Unknown Wi-Fi Region ID : 1 Initial Password : XXXXXXXX