Chapter 2 Setup Changing the Paper Width The printer allows you to use three widths roll paper. The factory default setting is to use 58 mm width roll paper. Attach 58-mm width roll paper guide to the right No roll paper guide Attach 58-mm width roll paper guide to the right (Default) Attach 40-mm width roll paper guide to the left • You cannot change the paper width to a wider paper width after you have used the printer. Because parts of the print head that had not touched paper may be damaged by being rubbed against the platen roller, and the autocutter may have worn out. • If you must change to a roll paper wider than the paper width in use, the software settings may need to be changed.
For more details, see "Software Settings" on page 78 . 80 mm 80 mm 58 mm 58 mm 80 mm 58 mm 80 mm 80 mm 40 mm 40 mm 80 mm 40 mm 40 mm 40 mm 40 mm 58 mm 58 mm 58 mm 32