Chapter 2 Setup 10 Click the “x” button of TM Bluetooth Connector to exit. • If “Error” is displayed when you click the [Search] on the TM Bluetooth Connector, check whether: * The Bluetooth adapter is installed to the computer. * Bluetooth is ON in the Windows settings. • If the device is not displayed on the TM Bluetooth Connector or the TM Bluetooth Connector Status shows “ ” after pairing. Check whether: * The printer is not turned on. Turn on the printer. * The printer is 10 m or further away from the computer. * Confirm that there is no other wireless device, such as a microwave oven and cordless telephone, that can interfere with the Bluetooth printer.
* If the printer and the computer are placed in different rooms separated by a wall, move the printer and/or the computer in the same room. * The printer may not be detected when the search time is short. Try search again with longer search time. * While a computer and printer are communicating, the printer cannot be detected by other computers. Confirm that the printer to be detected is not communicating with any computer. MAC Address Confirmation You can check the printer's MAC address using the following procedures. • Printing the status sheet • A printer self-test (Only supported on Ethernet.
For wireless, see the status sheet.) • Using EpsonNet Config (Web version) that can be opened from a web browser You can check the MAC address for network tethering using the following method. • Printing the status sheet (MAC Address2) 61