Chapter 4 Advanced Usage Serial Interface Settings (Serial model only) Baud rate • 115200 bps (initial setting) • 2400 bps • 4800 bps • 9600 bps • 19200 bps • 38400 bps • 57600 bps Parity • None (initial setting) • Odd parity • Even parity Handshake • DTR/DSR control (initial setting) • XON/XOFF control Bit length • 8-bit wide (initial setting) • 7-bit wide Receipt Enhancement 89 Functions Available settings Initial setting Automatic top logo printing Key code Undefined Justification (Left justified, Centered, Right justified) Undefined Number of deleted lines after top logo printing Undefined Automatic bottom logo printing Key code Undefined Justification (Left justified, Centered, Right justified) Undefined Advanced settings for automatic top/ bottom logo printing Print top logo when paper is fed to the cut position (Enabled/Disabled) Enabled Print top logo at power-on (Enabled/Disabled) Disabled Print top logo when the roll paper cover is closed (Enabled/ Disabled) Enabled Print top logo when the buffer is cleared during a recover- able error.(Enabled/Disabled) Enabled Print top logo when advancing paper using the Feed but- ton is finished (Enabled/Disabled) Disabled