2.5 Providing power to the printer You can supply power through the battery pack or the external power supply as follows; Battery: Lithium-ion battery LIP-2500 (packaged or optional) Output: DC 7.4 V Capacity: 2200 mAh External power supply: • PS-10 (optional) Rated voltage: DC 12 V Input voltage: AC100 V to 240 V • LPS power supply Rated voltage: DC 12 V Output current: 0.06 A to 3.5 A 2.5.1 Before Using the Battery Pack Charge the battery pack prior to using the printer for the first time. Cautions relating to battery pack safety are previously indicated in this manual. See the battery manual packaged with the printer for further details. WARNING:
Be sure to use the battery that came with the printer. Using a battery other than the one specified may cause fire, explosion, leakage, overheating, or other damage. 2.5.2 Installing the battery CAUTION: There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2-8 Setup Rev. A