Chapter 3 Advanced Usage Functions Automatic line feed • Normally disabled (default setting) • Normally enabled This is only enabled when using a serial interface. When using another interface, make settings by using the DIP switches. USB power saving function • Disabled • Enabled (default setting) Enabled when anything except for UB-U06/UB-R04/UB-IU01 is installed to the UIB. The USB power saving function is valid only when the USB interface communication condition is set to the vendor-defined class and the system configuration is set so that the USB driver can support the USB power saving function.
3 Paper sensors to output paper end signal • Roll paper out detector (default settings) • Disabled When using a parallel interface, make settings by using the DIP switches. Error signal output • Enabled (default setting) • Disabled When using a parallel interface, make settings by using the DIP switches. Automatic paper reduction Extra upper space reduction • Disabled (default setting) • Enabled 61