4-2 Function Mode Operator Rotation Direction Selection •Select the rotation direction applied to the RUN command via the Digital Operator. •This is disabled at terminals. 4 Frequency Reference Selection Select the method for using the frequency reference. Functions 4-10 Parameter No. Function name Data Default setting Unit F004 Operator rotation direction selection 00: Forward 01: Reverse 00 Parameter No. Function name Data Default setting Unit A001 Frequency reference selection 00: Digital Operator (FREQ adjuster) 01: Terminal 02: Digital Operator (F001) 03: ModBus communication 04: Option 1 05: Option 2 06: Pulse train frequency 07: Not used 10:
Operation function result 02 Related functions A005, A141 to A143, A145, A146 Data Frequency reference source 00 Set a frequency with the FREQ adjuster on the Digital Operator. (Enabled when 3G3AX-OP01 is used.) 01 Set a frequency via terminals. (FV-FC, FI-FC, FE-FC) 02 Set a frequency via the Digital Operator (F001). 03 Set a frequency through the ModBus communication. 04 Set a frequency via the PCB mounted to option port 1. 05 Set a frequency via the PCB mounted to option port 2. 06 Set a frequency as a pulse train by using 3G3AX-PG01. 07 Not used 10 The operation result of the frequency operation function is defined as a frequency reference.