Appendix-1 Parameter List Appendix * 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001 to C008. App-24 Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Set value Analog monitor C027 MP selection 00: Output frequency 01: Output current 02: Output torque 03: Digital output frequency 04: Output voltage 05: Input voltage 06: Thermal load rate 07: LAD frequency 08: Digital current monitor 09: Motor temperature 10: Fin temperature 12: Not used 00 No C028 AM selection 00: Output frequency 01: Output current 02: Output torque 04: Output voltage 05: Input voltage 06: Thermal load rate 07:
LAD frequency 09: Motor temperature 10: Fin temperature 11: Output torque 13: Not used 00 No C029 AMI selection 00: Output frequency 01: Output current 02: Output torque 04: Output voltage 05: Input voltage 06: Thermal load rate 07: LAD frequency 09: Motor temperature 10: Fin temperature 14: Not used 00 No C030 Digital current monitor reference value 0.20 × Rated current to 2.00 × Rated current (Current value at the digital current monitor output 1440 Hz) Rated current Yes A