1 Setup of Camera & Software Vision Start the application software 1 Connect the dongle of application software to the PC. The LED of the connected dongle lights up. 2 Launch the application software from the Start Menu - OMRON - FJ-SW . Precautions for Correct Use • Install and use either 32-bit or 64-bit software according to your environment. Configuration of Processing Item "Camera Image Input GigE" Refer to Section 2 Processing Item "Camera Image Input GigE" on page 2-1. Making measurement flow You must allocate "Camera Image Input GigE" unit for each GigE cameras connected to the system. In each unit, you need to select camera to handle.
(Example 1) One camera can be handled by multiple Camera Image Input GigE units. In this case, each unit re- ceives camera image with modified camera parameters following the measurement flow. (Example 2) • Example 1: Add four Camera Image Input GigE units to use four cameras. • Example 2: Input multiple images with different camera parameters from one camera, by adding multiple Camera Image Input GigE units. 1-14 FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1)