● Do not open the menu on the instrument cluster while the vehicle is moving. Operation using the multifunction steering wheel Some system settings may be changed or deleted when the battery capacity of the 12-volt vehicle battery is low or the battery is re- placed. After the battery is fully charged, check and update system settings again. Please refer to at the start of the chapter on page 23. Menu in the instrument cluster Please refer to at the start of the chapter on page 23. The range and layout of the public information system menu depends on the vehicle electronic system and vehicle configuration.
The qualified workshop can program or change the relevant functions according to the vehicle equipment. Volkswagen recommends using a Volkswagen dealership. Fig. 17 Right side of multifunction steering wheel: Keys for operating instrument cluster menu and in- formation display (this type is an example only) Certain menu items can only be called up when the vehicle is stationary. As long as an alert with a priority of 1 → page 19 is displayed, no menu can be brought up. Certain alarm information can be confirmed and hidden by the button → Fig. 17 on the multifunction steering wheel. Driving data → page 17 Driver assist systems Vehicle Status (depending on model equip- ment) → page 19.
Select menu or information display – Switch on the ignition. – If the display displays a message or a picto- graph of the vehicle, press the button → Fig. 17 on the lever as many times as nec- essary. – Models equipped with analogue instrument cluster: To browse the selection menu, press the but- tons or → Fig. 17 . – To open the menu display item or information display item, press the button → Fig. 17 or wait a few seconds until the system automati- cally opens the menu or displays the informa- tion. – Models equipped with digital instrument cluster (basic):
Depending on the information mode se- lected, the selection menu is available by the buttons or , and then by buttons or Owner's manual 24