Руководство по эксплуатации Kuhnke UD5 Bi-directional Rotary Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk UD5 Series Bi-directional Rotary Solenoid * By using a cooling surface 300 cm 2 , the permissible duty cycle can be extended up to 1.7x normal rating M A = Initial torque M E = End torque (5 ° before end of rotary angle) Coil terminals: - Flying leads - Terminal box (6.3 DIN 46247) Weight: appr. 760 g Dyn. moment of inertia (rotational mass): appr. 3.6 10 --6 kg m 2 Time constant: appr.

8–25 ms For a nominal voltage of 205 V DC (connected to 230 V AC with Si-bridge rectifier) the torques will be the same as for our rotary solenoid range with a nominal voltage amounting to 205 V DC provided their duty cycles are the same. The duty cycles available may differ from those of the 205 V DC range. 30 Document RSU500/12 Revision 00 2 ca.79 19 ca.72 Ш6 h9 Ш6 h9 M4 ca.60 Ш35 ± 0,5 Ш50 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Voltage ratin g V DC 24 205 V DC V oltage rating ED* LK % 100 44 21 13 5 100 35 22 13 5 % ED* LK Current ratin g mA 420 875 1.740 2.760 6.490 45 127 195 322 840 mA C urrent rating Nominal resi stance  57,4 27,4 13,8 8,7 3,7 4 .546 1.613 1.050 636 244  Nomin al resistance UD 52, 25° MA Ncm 6,8 11,5 11,4 15,3 16,0 19,0 18,5 21,3 23,5 26,0 1 5,8 11,5 0,5 15,4 14,5 17,5 17,5 21,0 23,0 25,0 Ncm MA UD 52, 25° ME Ncm Ncm ME UD 53, 35° MA Ncm 5,2 10,2 9,4 13,5 13,5 16,0 16,0 17,5 22,0 20,0 4,4 9,5 9,4 13,6 12,2 15,2 15,2 17,0 21,0 19,5 Ncm MA UD 53, 35° ME Ncm Ncm ME UD 54, 45° MA Ncm 3,6 9,3 6,8 12,5 11,0 14,5 13,8 16,0 18,8 18,0 3,1 6,9 8,6 12,5 9,6 14,0 12,5 15,5 18,0 17,7 Ncm MA UD 54, 45° ME Ncm Ncm ME UD 56, 65° MA Ncm 2,2 8,6 4,4 11,5 8,1 13,5 10,3 14,3 15,5 15,0 1,9 4,5 8,1 11,6 6,7 12,8 9,8 14,0 14,5 15,0 Ncm MA UD 56, 65° ME Ncm Ncm ME UD 59, 95° MA Ncm 0,8 7,2 2,2 8,9 4,1 9,8 5,6 9,8 9,8 9,2 0,6 2,2 6,6 9,0 3,3 9,6 5,1 9,8 9,1 9,2 Ncm MA UD 59, 95° ME Ncm Ncm ME 4 20±0,5 4 80±0,5 2

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk UD5 Series Ordering Information Order specifications Rotary solenoid Angular travel 25 ° 35 ° 45 ° 65 ° 95 ° Shaft design Flying leads (20 cm standard length) Coil terminals Terminal box 1) Nominal voltage Standard voltage (connected to 230 V AC with Si-bridge rectifier) Perm. duty cycle under air cooled conditions (LK) 1) Suits push-on connector 6.3 DIN 46 247 and plug-in socket Z801. Insulation class: B (max. permissible temperature = 130 ° C) Test voltage: 2500 V (eff) Accessories:

Plug-in socket Z801 Available Shaft design BOO 41,0 10,0 Document RSU500/22 Revision 00 2 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm 5,5 34,2 Plug-in socket Z811 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier (30,5) Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. UD 5 4 -BOO- - F - 24 V DC 100 % ED UD 5 2 3 4 6 9 BOO F N 24 205 100 % ED Ø 1

Стр. 2