Kuhnke E7 Rotary Solenoid Datasheet (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk E7 Series Rotary Solenoid * By using a cooling surface 900 cm 2 , the permissible duty cycle can be extended up to 1.7x normal rating M A = Initial torque M E = End torque (5 ° before end of rotary angle) Coil terminals: - Flying leads - Terminal box (6.3 DIN 46247) Weight: appr. 2000 g Dyn. moment of inertia (rotational mass): appr. 90 10 --6 kg m 2 Time constant: appr. 10–50 ms All solenoids with M A > 9.5 Ncm are available with spring return, with a rating of M R = 8.0 Ncm approximately. The operational voltage of 205 V DC results from rectifying 230 V AC with a bridge rectifier.

ca.31 Document RSE700/13 Revision 00 2 Ш10 h9 ca. 85 ca.97 75 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Voltage ratin g V DC 24 205 V DC V oltage rating ED* LK % 100 79 46 23 8 100 70 45 23 5 % ED* LK Current ratin g A 1,24 1,56 2,55 4,90 12,60 0,13 0,20 0,30 0,57 2,21 A C urrent rating Nominal resi stance  19,4 15,4 9,4 4,9 1,9 1.616 1.020 685 362 92,6  Nomin al resistance E 72, 25° MA Ncm 62 78 70 84 85 96 105 112 134 133 50 70 63 82 84 96 105 112 151 141 Ncm MA E 72, 25° ME Ncm Ncm ME E 73, 35° MA Ncm 50 72 58 77 74 87 95 95 126 102 40 60 55 76 79 86 94 94 140 102 Ncm MA E 73, 35° ME Ncm Ncm ME E 74, 45° MA Ncm 38 67 45 70 63 78 84 85 111 90 32 60 44 70 63 78 84 84 130 84 Ncm MA E 74, 45° ME Ncm Ncm ME E 76, 65° MA Ncm 23 60 27 63 43 70 62 72 92 69 21 55 27 61 43 70 61 72 106 65 Ncm MA E 76, 65° ME Ncm Ncm ME E 79, 95° MA Ncm 12,4 45 14 46 22 50 36 50 60 42 10,5 40 13,5 44 21 48 34 48 71 36 Ncm MA E 79, 95° ME Ncm Ncm ME 30 19 6 25 ±0,5 53 Ø50

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk E7 Series Ordering Information Order specifications Rotary solenoid Angular travel 25 ° 35 ° 45 ° 65 ° 95 ° Shaft design Coil terminals Terminal box 2) Flying leads (20 cm standard length) Standard voltage Nominal voltage (connected to 230 V AC with Si-bridge rectifier) Perm. duty cycle under air cooled conditions (LK) 2) Suits push-on connector 6.3 DIN 46247 and plug-in socket Z 801. Insulation class: B (max. permissible temperature = 130 ° C) Test voltage: 2500 V (eff) Accessories:

Plug-in socket Z801 Document RSE700/23 Revision 00 2 41,0 10,0 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm 5,5 34,2 Plug-in socket Z811 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier (30,5) Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. E 7 4 -LO L- - N - 24 V DC 100 % ED E 7 2 3 4 6 9 -LO L- F N 24 205 100 % ED Ø 1

Стр. 2

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk E7 Series Shaft & Rotation Options Shaft designs The following types of rotary sole- noids are available. Resulting in the following abbrevia- tions for ordering: 1. letter Direction of rotation (facing the out- put shaft) L anti-clockwise rotation R clockwise rotation B shaft extensions both ends 2. letter Centering shoulder O standard type without mounting ring R optional L optional 3.

letter Return spring – the torque exerted by the spring is to be subtracted from the torque values given in the data sheets L on the anti-clockwise shaft end R on the clockwise shaft end O no return spring fitted B both sides Example 1 anti-clockwise rotation, no return spring, standard shaft length LOO - Example 2 shaft extensions on both ends, return Document RSE700/33 Revision 00 2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Normal Spring return LOO LOL LOR ROO ROL ROR BOO BOL BOR Spring return ØD LF spring on anti-clockwise rotation en BOL - Spring return arrangement (with protection cap) Solenoid size 0 Mounting ring Dimensions in mm E7 h1 D M ounting ring Ø D 32,0 Ø LF 8,0 Ø Dh10 28,0 LZ LZ 4,5 um oc

Стр. 3