CANopen Slave Communication Module IFD9503 z Main index: H’2020-----communication control parameters z Main index: H’2021-----communication status parameters z Main index: H’2022-----communication status parameters 3. Parameter objects of Delta temperature controller (DTA) in the object dictionay z Main index: H’2047-----communication parameters DVP-PLC Application Manual 44 Sub-index Parameter No.
Parameter funcion (hex) 2 11-01 Start-up frequency of the auxiliary motor 3 11-02 Stop frequency of the auxiliary motor 4 11-03 Delay time before starting the auxiliary motor 5 11-04 Delay time before stopping the auxiliary motor 6 11-05 Sleep/wake up detection time 7 11-06 Sleep frequency 8 11-07 Wake-up frequency Sub-index Parameter Parameter funcion (hex) address 1 H’2000 Control instruction 2 H’2001 Frequcny instruction 3 H’2002 E．F．On / Reset instruction Sub-index Parameter Parameter funcion (hex) address 1 H’2100 Error code 2 H’2101 Status word 3 H’2102 Frequency instruction ┊ ┊ ┊ F H’210E Number of PG pulses within unit time (high) 10 H’210F Output frequency（KW） 11 H’2110 Reserved Sub-index Parameter Parameter funcion (hex) address 1 H’2200 Feadback signal (XXX.XX%) 2 H’2201 Defined by user (low word) 3 H’2202 Defined by user (high word) 4 H’2203 AVI analog input (XXX.XX%) 5 H’2204 ACI analog input (XXX.XX%) 6 H’2205 AUI analog input (XXX.XX%) Sub-index Parameter Parameter funcion (hex) address 1 H’4700 Process value 2 H’4701 Set value 3 H’4702 Upper limit alarm 1 ┊ ┊ ┊ 1C H’471B Software version