CANopen Slave Communication Module IFD9503 4. Parameter objects of Delta temperature controller (DTB) in the object dictionay z Main index: H’2010-----communication parameter z Main index: H’2020-----communication parameters z Main index: H’2047-----communication parameters 5. Parameter objects of Delta servo drive (ASD-A) in object dictionay z Main index:
H’2000-----moniter parameters DVP-PLC Application Manual 45 Sub-index Parameter Parameter funcion (hex) address 2A H’4729 AT setting 2C H’472B Error code 34 H’4733 CT monitor value Sub-index Parameter Parameter funcion (hex) address 1 H’1000 Process value 2 H’1001 Set value 3 H’1002 Upper-limit of temperature range ┊ ┊ ┊ 66 H’1065 Link pattern number setting of the correspond pattern 67 H’1066 Link pattern number setting of the correspond pattern 68 H’1067 Link pattern number setting of the correspond pattern Sub-index Parameter Parameter funcion (hex) address 1 H’2000 Setting up pattern 0 ~ 7 temperature set point 2 H’2001 Setting up pattern 0 ~ 7 temperature set point 3 H’2002 Setting up pattern 0 ~ 7 temperature set point ┊ ┊ ┊ BE H’20BD Setting up pattern 0 ~ 7 excution time BF H’20BE Setting up pattern 0 ~ 7 excution time C0 H’20BF Setting up pattern 0 ~ 7 excution time Sub-index Parameter Parameter funcion (hex) address 24 H’4723 Setting up control RUN/STOP 25 H’4724 Temperature unit 26 H’4725 Selecting decimal point position 27 H’4726 Selecting communication write-in 28 H’4727 PID AT setting 5B H’475A Setting up valve feedback status 2C H’472B Auto-tunning valve feedback status Sub-index Parameter No.
Parameter funcion (hex) 1 0-00H Firmware version 2 0-01H Drive error code