Kuhnke UV40 Bi-directional Linear Solenoid Datasheet (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk UV40 Series Bi-d irectional Linear Solenoid Linear solenoid Order specifications Design type Coil terminals Plug 1) Flying leads (10 cm standard length) Nominal voltage (standard voltage) 2) Perm. duty cycle under air cooled conditions (LK) 1) Suits plug-in socket 6.3 DIN 46247 2) Other voltages are available on request up to 230 V DC Weight: Complete solenoid: appr. 785 g Armature: appr. 100 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: F (max. permissible temperature = 155 ° C) UV40-N 24 V DC 100% ED Terminal box: 6.3 DIN 46247 Plug Z803 available as accessory.

3) If solenoid is mounted directly onto a flat metal surface of at least 600 cm 2 , the duty cycle can be extended up to 1.3 x nominal rating 100 %ED Document LNSUV4/12 Revision 00 2 70 5 F/N 40 Force vs. Stroke diagram F = f (s) 30 25 15 20 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 45 10 100 stroke s = 0 corresponds to armature in fully home position 0 2 4 6 8 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. UV 40 – N – 24 V DC 100 % ED UV 40 F N 24 100 % ED 100 45 2 5 15 5 % Perm. duty cycle (ED)3) 21 41 8 1 125 317 W Nominal coil power Pn

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk UV40 Series Bi-d irectional Linear Solenoid ca.62 M5 Dimensions given when system 1 current-carrying Direction of stroke 41,0 10,0 Plug-in socket Z80 3 Screw joint PG 9 for lead diameter 4.5 - 7 mm Document LNSUV4/22 Revision 00 2 34,2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

17 50 ca.50 M3 Ø22 30 30 19 4 4 30 M5 40 15+1 15+1 2 M5 1 1 2 1 3 2 6 Plug allocation 31 4 84 4 145,5 ca.50 M3 19 1 2 6 31 4 84 4 145,5 Ø22 30 4 1 2 4 4 84 9,0 Ø 1 5,5

Стр. 2