Komatsu D65EX Manual (EN)

BEFORE READING THIS MANUAL

. FOREWORD BEFORE READING THIS MANUAL this manual and on the machine before performing Komatsu cannot predict every circumstance that might involve a potential hazard when the machine is used. For a machine with a ROPS canopy, a pocket is provided at the end of the floor. 1 - 2 BEFORE READING THIS MAN UAL This manual give s details of the operation and m ethods of inspection and maintenance fo r this machine that must be obeyed in orde r to use the machine safely. Mo st accidents are caused by the failure to fo llow fundamental safety rules for the oper ation and maintenance of mac hines. Read, understan d and follow all precautions an d warnings in operation and ma intenance.

Failure to do so ma Therefore, the sa fety messages in this manual a nd on the machine may not include all pos sible safety precautions. If you carry out a ny operation, inspection, or ma intenance under conditions that are not d escribed in this manual, understand that it is your responsibility to take th e necessary precautions to ensure safety . In no event should you or others engage in the prohibited uses or actio ns described in this manual.

Improper ope ration and maintenance of the machine ca n be hazardous and could res ult in serious If you sell the ma chine, be sure to give this man ual to the ne w owner together with the m Always keep this Operation and MaintenanceMa nual in the location shown on the right so th at all relevant personnel can read it at any Operation and M aintenance Manual Storing Pla For a machine wit h a cab, a pocket is provided on the inside of right and left door If this manual is l ost or damaged, contact your distributor immediately to arrange for its r eplacement. For details regardingthe mac hine serial No. you will need to provide your Komatsu distributor,see "TA BLE TO ENTER SERIAL NO.

AND DISTRI BUTOR (PAGE 1-11)". This manual uses the international units (SI) for units of measurement. For reference, unit s that have been used in the past are give n in ( ).

Стр. 3

BEFORE READING THIS MANUAL

. FOREWORD BEFORE READING THIS MANUAL 1 - 3 The explanations and epared lates available as of t he da te of its publication. C ontinuing improvements in t he design of this ma y lea d t o additional chang es tha t are not reflected in th is manual. Consult Komatsu or your Komatsu distributor for t he latest available information c oncernin g your machi ne or with question s regardin g information contained in t his manual The numbers in circles i n the illustrations correspon d to the numbers i n ( ) in t he t ext (For example: 1 → (1)) Komatsu delivers machines tha t comply with all applicable r egulations and standards of the country t o which it has been shipped.

If this machine has been pu rchased in anothe r country, it may lac k c ertain safety devices and specifications tha necessary for use in your country. If here is an y question about whether your product complies with th standard of count consult Komatsu distributo r before operating the machine

Стр. 4

IMPORTANT SAFETY INFORMATION

. FOREWORD IMPORTANT SAFETY INFORMATION This hazardous situation which, if not avoided, will This signal word indicates a potentially hazardous situation which, if not avoided, could This signal word indicates a potentially hazardous situation exists which, if not avoided, The following are used to alert you to information that must be followed to avoid damage to the machine. 1 - 6 IMPORTANT SAFETY INFORMATI To enable you to use the machine safel y, and to preve nt injury to operators , service personnel or bystanders, the precautions warnings the machin always followed. To i dentify important safety messages in the manual an d on the m achine labels, the following sign al words are used.

The "Safety Alert Symbol" essages on machines, in manuals, and elsewhere. When you see this symbol, be al ert to the risk of personal inj ury or deat h. Follow t he instructions in th e safety message. mminently ult in death o r serious injury. ult in death o r serious injury. y result in mi nor or moderat signal word s precaution is given where the machi ne may be damaged or the ser vice life reduce d if precaution is s word is use d for informatio n that is u seful t o know.

Стр. 7

GENERAL VIEW AND DIRECTIONS OF MACHINE

. FOREWORD INTENDED USE INTENDED USE GENERAL VIEW AND DIRECTIONS OF MACHINE (front,rear,left,right) are determined according to the view from the (1) (2) (3) (4) (5) (6) Blade Tilt cylinder Lift cylinder Cab ROPS guard Track shoe (7) (8) (9) (10) (11) (12) Sprocket Track frame Step Frame Idler ROPS canopy (A) (B) Front Rear (C) (D) Left Right 1 - 7 USE OF MACHINE This Komatsu machine is designed to be used ma inly for the following Dozing Cutting into hard or fro Felling trees, removing See the section "WORK POSSIBLE USING BULL DOZER (PAGE 3-108)" for further detai In this operator's seat in the dire ction of travel (front) of t

Стр. 8