Super Micro SBA-7121M-T1 BIOS Setup Manual PDF Download (EN)

SBA-7121M-T1Blade Module BIOS Setup Manual The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com . Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent. IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA.. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense. California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further details. WARNING:

HANDLING OF LEAD SOLDER MATERIALS USED IN THIS PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM. Manual Revison 1.0 Release Date: March 31, 2008 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2008 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America ii

Стр. 2

Main BIOS Setup Menu

SBA-7121M-T1 Blade Module Bios Setup Manual Introduction This document describes the Phoenix BIOS™ Setup utility for the SBA-7121M-T1 AMD Blade Module. The Phoenix ROM BIOS is stored in a flash chip and can be easily upgraded using a floppy disk-based program. See Chapter 9 of the AMD SuperBlade User’s Manual (MNL-0975) for further details. Running Setup NOTE: Default settings are in bold text unless otherwise noted. The BIOS setup options described in this section are selected by choosing the appropriate text from the M AIN BIOS S ETUP screen. All displayed text is described in this section, although the screen display is often all you need to understand how to set the options.

When you first power on the computer, the BIOS is immediately activated. While the BIOS is in control, the Setup program can be activated in one of two ways: 1. By pressing ELETE > immediately after turning the system on, or 2. When the message Press the key to enter Setup appears briefly at the bottom of the screen during the POST, press the ELETE > key to activate the main S ETUP menu. Main BIOS Setup Menu The M AIN M ENU screen has two main frames. The left frame displays all the options that can be configured. “Grayed-out” options cannot be configured. The right frame displays the key legend. Above the key legend is an area reserved for a text message.

When an option is selected in the left frame, it is highlighted in white. Often a text message will accompany it. NOTE: The BIOS has default text messages built in. SuperMicro retains the option to include, omit, or change any of these text messages. Settings printed in Bold are the default values. Use the U P /D OWN arrow keys to move among the different settings in each menu. Use the L EFT /R IGHT arrow keys to change the options for each setting. 1

Стр. 3

Advanced Settings Menu

BIOS Setup Manual Items that use sub-menus are indicated with the X icon. With the item highlighted, press the NTER > key to access the submenu. The BIOS setup utility uses a key-based navigation system called hot keys. Most of these hot keys ( , , NTER >, , RROW > keys, and so on) can be used at any time during the setup navigation process. Press the SC > key to exit the CMOS S ETUP menu. When you first enter the AMI BIOS Setup utility, you will see the M AIN M ENU screen. You can always return to the M AIN M ENU by selecting the Main tab on the top of the screen with the arrow keys.

The M AIN M ENU screen provides you with a system overview, which includes the version, built date and ID of the AMIBIOS, the type, speed and number of the processors in the system and the amount of memory installed in the system. System Time/System Date You can edit the S YSTEM T IME /S YSTEM D ATE field to change the system time and date. Highlight S YSTEM T IME or S YSTEM D ATE using the RROW > keys. Enter new values through the keyboard. Press the AB > key or the RROW > keys to move between fields. The date must be entered in DAY/MM/DD/YYYY format. The time is entered in HH:MM:SS format. Please note that time is in a 24-hour format. For example, 5:30 A.M.

appears as 05:30:00 and 5:30 P.M. as 17:30:00. Advanced Settings Menu Choose Advanced from the BIOS Setup Utility main menu with the arrow keys. The items with a triangle beside them have sub menus that can be accessed by highlighting the item and pressing NTER >. Below is a list of all submenus in the A DVANCED S ETTINGS menu: BOOT Features CPU Configuration SATA Configuration PCI/PnP Configuration Super IO Configuration Chipset Configuration NorthBridge Configuration SouthBridge/MCP55 Configuration Event Log Configuration PCI Express Configuration Remote Access Configuration System Health Monitor 2

Стр. 4

Table 1. BOOT Features

BIOS Setup Manual BOOT Features The menu options in the BOOT S ETTINGS C ONFIGURATION submenu and their descriptions are shown in Table 1 . Table 1. BOOT Features 3 Menu Option Description Quick Boot If ENABLED, this option will skip certain tests during POST to reduce the time needed for the system to boot up. The options are Enabled and DISABLED. Quiet Boot If Disabled, normal POST messages will be displayed on boot-up. If ENABLED, this display the OEM logo instead of POST messages. Add-On ROM Display Mode Set this option to display add-on ROM (read-only memory) messages. The options are Force BIOS and KEEP CURRENT. The default setting is Force BIOS.

• Select Force BIOS to allow the computer system to force a third party BIOS to display during system boot. • Select KEEP CURRENT to allow the computer system to display the BIOS information during system boot. Bootup Num-Lock Set this value to allow the NUMBER LOCK setting to be modified during boot up. The options are On and OFF. Wait for ‘F1’ If Error Select Enable to activate the WAIT FOR F1 IF ERROR function. The options are Enabled and DISABLED. Hit ‘DEL’ Message Display Select Enabled to display message to hit the DEL key to enter SETUP. The options are Enabled and DISABLED. Interrupt 19 Capture Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and DISABLED.

OS Installation Change this setting if using a 64-bit Linux operating system. The available options are Other and LINUX. X ACPI Configuration ACPI Version Features Use this setting the determine which ACPI version to use. Options are ACPI v1.0, ACPI V2.0 and ACPI V3.0. ACPI APIC Support Determines whether to include the ACPI APIC table pointer in the RSDT pointer list. The available options are Enabled and DISABLED. ACPI OEMB Table Determines whether to include the ACPI APIC table pointer in the RSDT pointer list. The available options are Enabled and DISABLED. Headless Mode Use this setting to ENABLE or Disable headless operation mode through ACPI.

MCP55 ACPI HPET Table Use this setting to either Enable or DISABLE the MCP55 ACPI HPET table. X Power Configuration Power Button Mode Allows the user to change the function of the power button. Options are On/Off and SUSPEND. Restore on AC Power Loss This setting allows you to choose how the system will react when power returns after an unexpected loss of power. The options are POWER OFF, POWER ON and Last State.

Стр. 5