Руководство по эксплуатации DPA Pressure Sensor — измерение давления (EN)

Multifunction Pressure Sensor DPA Series ► Energy-saving mode ► 3 sets of color display ► Various unit conversion ► Fast zero reset ► Analog output function ► Safety control function ► Various output modes ► Easy code display ► 10 sets of output response time setup ► Parameter copy function Various Unit Conversion Fast Parameter Copy The DPA Series offers 6 kinds of globally adopted pressure units for measurement and display. The DPA Series fast copies the internal parameters to other slaves and saves repeated parameter setup time.

inchHg psi Copy kPa mmHg Master Slave kg/cmІ bar 3-Color LCD Display (Green, Red, Orange) Safety Control Mode The large LCD with a green, red and orange 3-color LCD display allows users to set the display color according to the ambient environment, such as when the pressure is within normal range or exceeds the allowed range. The display’s color is orange when in parameter setup mode. This makes it easy for reading and reduces operation errors. The safety control mode prevents operators from carelessly touching relevant parameters and affecting the operation and production of the equipment.

In safety control mode Color for upper / lower limit display (green / red) Parameter set up (orange) Locked 1

Стр. 2

Specifications Product Profile & Outline Analog output indicator 1 Digital output 1 indicator 2 1 4 9 Digital output 2 indicator 3 Pressure / parameter display 4 2 5 SV / setup item display 5 3 2 OUT 1 OUT ANALOG UP key 6 10 SET key 7 6 7 8 DOWN key 8 Power supply and output terminals 9 Pressure input pore 10 2 Power Supply Voltage range 12 ~ 24 VDC ± 10% no isolation Power consumption 40 mA Max.; current output type 60 mA Max. Pressure Measurement M Me Te Pressure type Non-corrosive gas, gauge type Measurable range DPA01: -100 kPa ~ 100 kPa DPA10: -100 kPa ~ 1,000 kPa ax. durable pressure DPA01: 200 kPa DPA10:

1,500 kPa asurement accuracy ± 3% entire process mperature inaccuracy ± 2% entire process Display Setup display 2-line LCD display, 4 digits for measured value and 3.5 digits for setup display Status display LCD output status display Display mode 3 colors for different modes Cycle 250 ms, 500 ms, 1,000 ms Output Number of outputs Built-in 2 NPN or PNP transistor digital outputs and 1 analog output Transistor output NPN: Max. durable pressure 30V / 100 mA, residual voltage 1.5 V PNP: Max. durable pressure 30V / 100 mA, residual voltage 1.5 V Analog output 1 ~ 5 V: Min. output load resistance 1,000 Ω 4 ~ 20 mA: Max.

output load resistance 400 Ω; linear inaccuracy Response time 2 ms, 4 ms, 10 ms, 30 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms Output inaccuracy Linear inaccuracy: Pore Size P Outer diameter PT1/8, inner diameter M5 N Outer diameter NPT1/8, inner diameter M5 R Outer diameter Rc1/8, inner diameter M5 Shock Resistance 10 ~ 550 Hz, 100 mm, 3 axes for 2 hours Vibration Resistanc e Max. 100 m/s2, 3 axes 6 directions, 3 times each Operating Ambient Temperature 0°C ~ +50°C Storage Temperatu re -20°C ~ +65°C Altitude Operating Relative Humidity 35% ~ 80% RH (non-condensing)

Стр. 3

Terminals Positive power supply input (Brown) 1 Digital output 1 signal (Black) 2 Digital output 2 signal (White) 3 Analog output signal (Orange) 4 Negative power supply input (Blue) 5 1 2 3 4 5 Various Output Control Modes DC (+)(Brown) +12~24 V DC (+)(Brown) +12~24 V DPA Main Circuit Self- loading DPA Main Circuit DC (-)(Blue) DC (-)(Blue) NPN +1 ～ 5 V Output NPN +4 ～ 20 mA Output DC (+)(Brown) +12~24V DC (+)(Brown) +12~24 V DPA Main Circuit DPA Main Circuit DC (-)(Blue) DC (-)(Blue) PNP +1 ～ 5 V Output PNP +4 ～ 20 mA Output 3 1 KΩ Analog output (Orange) +1~5 (V) lSoaedl OUT1 (Black) +4~20 mA l Soae l Soae dlfi-ng lSoaedlf i-ng lSoaedl fi-ng loading Self- 1 KΩ OUT2 (White) oaed lS loading lfi-ng loading OUT2 (White) lSoaedlfi-ng Analog output (Orange) l Soaedl +4~20 mA lSoaedlfi-ng lSoae Analog output (Orange) +4~20 mA lSoaedlfi-ng lSoae dlfi-ng l Soaedl fi-ng +4~20 mA lSoaedlf Self - ing loading Self-

Стр. 4

Ordering Information - P Pressure Pore Type P Outer pore 1/8 PT, inner pore M5 N Outer pore 1/8 NPT, inner pore M5 G Outer pore 1/8 G, inner pore M5 Output Type N NPN output + 4 ~ 20 mA M NPN output + 1~ 5 V Range for Pressure Measurement 01 -100 kPa ~ 100 kPa 10 -100 kPa~1,000 kPa P PNP output + 4 ~ 20 mA Q PNP output + 1 ~ 5 V Product Name DPA Series pressure sensor 4 DPA 0 1 N

Стр. 5