User Manual EM303B General Purpose Inverter 7.1.7 Fb Group: Not Used 7.1.8 FC Group: Parameters of Operation Control 75 Motor 2 Rotator Resistance R2 0.01～60.000 Ω XXXX 〇 345 FA-24 Motor 2 Stator& Rotor Leakage Inductance Ls 0.1～3000.0 mH XXXX 〇 346 FA-25 Motor 2 Stator& Rotor Mutual Inductance Lm 0.1～3000.0 mH XXXX 〇 347 FA-26 No. Function Range Unit Default Type S/N FA-27 Motor 2 Efficiency 30.0～99.0 % XXXX 〇 348 FA-28 Not Used 349 ~ 351 ~ FA-31 No. Function Range Unit Default Type S/N Fb-00 Not Used 352 ~ 383 ~ Fb-31 No. Function Range Unit Default Type S/N Acceleration/ DecelerationMode 0: Linear mode 1:
S curve mode 0 〇 384 FC-00 Proportion of Acceleration S Curve 0.0～50.0 % 30.0 〇 385 FC-01 Proportion of Deceleration S Curve 0.0～50.0 % 30.0 〇 386 FC-02 Fan Control 0: Run at power-on 1: Run at start-up 1 〇 387 FC-03 FC-04 Fan Delay Time 0.00~600.00 S 30.00 ● 388 FC-05 Not Used 389 Resume previous working status at power-on 0: Not Resume 1: Resume 0 〇 390 FC-06 Current Stall Control 0: Disabled 1: Not Used 2: Enabled 2 〇 391 FC-07 FC-08 Overcurrent Stall Current 50.00～180.00 % 150.00 〇 392 Current Limit Coefficient ofWeak Flux 0.20～1.00 0.70 393 FC-09 Energy Saving Operation Options 0: Energy saving operation disabled 1:
Energy saving operation enabled 0 〇 394 FC-10 Energy Saving Running Initial Frequency 10.00～600.00/10.0～600.0 Hz 20.00 〇 395 FC-11 FC-12 Energy Current Detecting 20.00～80.00 % 40.00 〇 396