B Software description 41 1. Vocabulary explanations 41 2 Software installation, access into program 2.1 Possible PC configuration 2.2 PC with a hard disk and 1 disk drive installation, access 42 42 42 3. Explanations for the software 46 3.1 The differences in the input keyboards 3.2 Important key functions 3.3 Coordinate system 3.4 Screen cursor 3.5 Menu structure - menu summary 3.6 Screen display 3.7 Selection / deselection of the menu points 46 47 48 49 50 52 52 4.
Menu points 4.1 Work piece 4.2 Draw 53 54 55 56 59 61 64 68 68 68 69 69 70 71 72 73 74 74 74 74 75 77 79 81 83 90 91 91 91 91 91 91 4.2.1 Cursor 4.2.2 Point 4.2.3 Line 4.2.4 Arc 4.2.5 Visible edges 4.2.6 Mirroring 4.2.7 Cleaning 4.2.8 Erasing the geometric element 4.2.9 Erasing all 4.2.10 Hotkeys - draw Specimen example 1 Specimen example 2 Specimen example 3 4.3 Program 4.3.1 Moving in the rapid 4.3.2 Moving with feed speed 4.3.3 Cycles Roughing cycle Back pocket cycle Follow contour cycle Cut-in cycle Threading cycle Machining possibilities:
CAD/CAM - Edit Tool change Erase the last movement Erasing the machining program Entering the feed values Change feed unit Entering the finishing offsets 4.3.4 4.3.5 4.3.6 4.3.7 4.3.8 4.3.9 4.310