Atari Games · Gauntlet · 1 стр.

Atari Games Gauntlet Operator's Sheet — Important Note to Operators Manual PDF (EN)

Оригинальное название: Atari Games Gauntlet Operator's Sheet — Important Note to Operators Manual PDF

Читать онлайнСкачать PDF (136 КБ)

Похожие инструкции

Текст документа

ATARI Important Note to Operators Atari Customer Service: United States (408) 434-3950 ———— Europe (Ireland) 062 52155 If the Gauntlet Operators Manual was not included in this game when you unpacked it, contact your distributor to get a free copy. (All Atari Games manuals for coin-operated Game Option Settings games also include illustrated parts lists.) Self-Test Coin and game options are selected by turning on the Self-Test switch to select the Self-Test Mode. Statistical information can also be viewed to help set the options for maximum player appeal. The self-test switch is located on the Audio PCB for the U.S.

version and on the utility panel for the Irish version (see Chapter 1 in the Gauntlet Operators Manual for illustrations showing the switch locations). If error messages appear on the screen, Operators Manual. Option Name Available Settings Reset High Score Table No Yes ~<d Sounds in Attract Mode No Yes ~<@ Restore Factory Default Settings No <4 Yes Game Difficulty O—Easiest 1 2—Easy 3 4—Moderate 5 refer to Chapter 3 in the Gauntlet Switch Test 6—Hard The Switch Test screen indicates the condition of the player controls. INPUT 0 through 3 in the display corresponds to the player controls as follows:

7—Hardest Health Per Coin INPUT 0 = Warrior (Thor) INPUT | = Valkyrie (Thyra) INPUT 2 = Wizard (Merlin) INPUT 3 = Elf (Questor) Operate the joysticks and pushbuttons for each player and check that the Switch Test screen displays a 0 (zero) under the appropriate row of numbers as follows:

Procedure 7 Joystick up Joystick down Joystick left Joystick right Press Fire 0 6 100, 125, 150, 175, 200, 225, 250, 300, 350, 400, 450, 500, 550, 600 «, 650, 700, 750, 800, 850, 900, 950, 1000, 1200, 1360, 1400, 1500, 1600, 1700, 1800, 1900, and 2000 Player Control Switch Test Test Indication 5 4 3 2 <4 Coins to Start 1 4, 2,3,4 Automatic Reset of High Score Tables No Yes < Disable Speech No ~@ Yes 1 =0 “4 Manufacturer's recommended settings Restore Factory Default Settings—lf you select Yes and exit from the Game Options Screen by pressing the Warrior Magic button, the game option settings stored in nonvolatile RAM will be cleared and repiaced by the manufacturer's default (recommended) settings when the game enters the Attract Mode.

0 0 0 0 Press Magic 0 Coin Options The Coin Options screen indicates the current coin option settings and is used to change those settings. MULTIPLIER should have a red box around it. Move the Warrior joystick right or left to cycle through eight multiplier selections as follows: ® ¢ * 1 Coin Counts as 1 Coin (Default) 1 Coin Counts as 2 Coins 1 Coin Counts as 3 Coins ¢ 1 Coin Counts as 4 Coins e ® 1 Coin Counts as 5 Coin 1 Coin Counts as 6 Coins e ® 1 Coin Counts as 7 Coins 1 Coin Counts as 8 Coins Select the desired value. Note that the default (recommended) setting of / Coin Counts as 1 Coin is highlighted in green. Move the Warrior joystick down to move the red box to BONUS ADDER.

Move the Warrior joystick right or left to cycle through seven bonus adder selections as follows: None (Default) 2 Coins Give 1 Extra Coin 4 Coins Give 4 Coins Give 5 Coins Give 3 Coins Give Free Play 1 Extra 2 Extra 1 Extra 1 Extra Coin Coins Coin Coin Select the desired value. Note that the default (recommended) setting None is highlighted in green. If you want to cancel the coin option changes and restore the original settings, press the Warrior Fire button. Press the Warrior Magic button to set the game for the options selected and obtain the next screen. Exiting from the Coin Options screen by turning off the Self-Test switch will not set the game for the selected coin options.

Game Difficulty—The Game Difficulty settings adjust the frequency of monster generation (hardest game difficulcy generates monsters the fastest). Game Difficulty or Health Per Coin—\f you change the game difficulty or the health per coin values and exit the Game Options screen by pressing the Warrior Magic button, a screen with the message PRESS BOTH WARRIOR. BUTTONS TO ABORT CLEARING STATS will appear as soon as the self-test switch is turned off and the game returns to the Attract Mode.

If you press the Warrior Magic and Fire buttons simultaneously within the displayed 10-second countdown, the statistics, histograms, and high score Disable Speech—If you select Yes and exit the Game Options screen by pressing the Warrior Magic button, the speech portion of the game sounds will be disabled. Statistics The Statistics screen provides a visual check of the current game statistics. The Statistics information is accumulated either from the first time the game was turned on or from the last time the statistics were reset. To reset the statistics information, press the Warrior Fire button. The following information appears on the Statistics screen:

¢ The Plyr 0-3 Coin messages show the number of coins deposited in each of the four coin mechanisms. © The 0-4 Plyr Mins messages show the total time, in minutes, of all the 0-, 1, 2-, 3-, and 4-player games that were played. (A ‘“‘zero-player’’ game is the time that the game was turned on but not being played.) © Total Games shows the total number of games played. One ‘‘game”’ is the time between leaving the Attract Mode and returning to it, regardless of time, number of coins inserted, or how many have played Gauntlet. The games are measured since the last time the statistics were cleared.

® Error Count shows the number of EEPROM The Game Options screen indicates the current game option settings, and is used to reset the high-score table and change the game option settings. Refer to Game Option Settings for the available options and the default (recommended) settings. Note that the default settings are highlighted in green. © If you want to cancel the option changes and restore the original settings, press the Warrior Fire button. Press the Warrior Magic button to set the game for the options selected and obtain the next screen. Exiting the Game Options screen by turning off the selftest switch will not set the game for the selected options.

will be re- Automatic Reset of High Score Tables—If you select Yes and exit the Game Options screen by pressing the Warrior Magic button, the High Score Table will automatically be reset to the factory scores and initials after every 2,000 games, but no less than 200 games since the last player entered initials. Game Options Move the Warrior joystick right or left and note that the settings in the red box change. Select the desired value. Move the Warrior joystick up or down to move the red box to the desired option. Move the Warrior joystick right or left to cycle through all the available game option settings, and select the desired value. Repeat this procedure for the remaining options.

table information tained. Otherwise they will be cleared (reset). errors that were detected. Total Coins shows the total number of coins deposited in all the coin mechanisms. ¢ Avg Time/Coin players. shows the average game time per coin, in seconds, for all Histograms The Histograms for Players 0 through 3 (0 = Warrior, 1 = Valkyrie, 2 = Wizard, 3 = Elf) are selected by pressing the Warrior Magic button. For each of four players, these screens show the lengths of the games from 0 to 300 or more seconds. The Histograms also provide corresponding bar graphs.

Стр. 1