Chapter 3 Advanced Tool Tutorials Point 2 Point 1 FIGURE 3–30. Select Reference Window 65. Click on the check mark to the left of FindPin 2:FindP2 to expand the tree view. Select PointofBestMatch:PointofBestMatch and click OK (Figure 3–30). 66. To select the reference for Point2, click in the area to the right of the blue arrow (Figure 3–29), and click on the three dots, which displays the Select Reference window, as shown in Figure 3–30. 67. Click on the check mark to the left of LeastSquaresCircle Fit:LsqCFit1 to expand the tree view. Select Fit Point:Pt and click OK (Figure 3–30). 68. Minimize the Step Tree Editor. 69. Click .
Observe that Right Pin to Center Distance tolerance is highlighted and Right Pin to Center Distance has been green check marked. 70. Highlight Right Pin to Center Distance tolerance (left pane). 3-40 Getting Started with Visionscape GigE Cameras