Руководство по эксплуатации: Absolute Rotary Encoder Hengstler AC58 — (EN)

email: sales@impulseautomation.co.uk web: www.impulseautomation.co.uk TECHNICAL DATASHEET Absolute Encoder AC 58 - Profinet Interface PROFINET - Encoder Profil PNO 3.162 Version 4.1 and 4.2 Resolution up to 34 Bit (22 Bit Singleturn + 12 Bit Multiturn) Updating of values 125μs / Cycle time 31.25μs Diagnostic LEDs Device data: position, speed, acceleration, diagnostic data, alarms Device configuration: resolution, total measuring range, preset, offset, direction, scaling, residual value function, speed limits, acceleration limits Wide temperature range of -40°C ...

+85°C “Best in Class“ shock and vibration specs Large number of variants available High energy efficiency AC58 Profinet TECHNICAL DATA mechanical 1 at 20 °C Specifications subject to change without notice. Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Housing diameter 58 mm Shaft diameter 6 mm / 8 mm / 9.52 mm (3/8 inch) / 10 mm / 12 mm (solid shafts) 9.52 mm (3/8 inch) / 10 mm / 12 mm / 12.7 mm (1/2 inch) / 14 mm (hub shafts) Other sizes available upon request.

Mounting Flange Synchro flange, Clamping flange, Tether flange, Square flange Protection class shaft input (EN 60529) IP64 or IP67 Protection class housing (EN 60529) IP65 and IP67 Shaft load axial / radial 40 N / 80 N Axial endplay of mating shaft (Hub Shaft only) ±1.5 mm Radial runout of mating shaft (Hub Shaft only) ±0.2 mm Max. speed max. 10,000 U/min (continuous duty) max. 12,000 U/min (short term) (higher values available upon request) Starting torque typ. 1 ≤ 0.05 Nm (lower values available upon request) Moment of inertia ca.

3.8 x 10-6 kgm2 Vibration resistance (DIN EN 60068-2-6) 300 m/s² (10 - 2000 Hz) Shock resistance (DIN EN 60068-2-27) 4000 m/s² (6 ms) Ambient temperature -40 °C ... +85 °C Storage temperature -40 °C ... +85 °C Material shaft Stainless Steel Material housing Aluminium (stainless steel as AC61 Profinet) Weight approx. 420 g (ST) / 450 g (MT) Connection Bus cover with 3x M12 connectors Doc No: AE0027 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page Version 3 290719TK 1/8

Стр. 1

TECHNICAL DATASHEET Absolute Encoder AC 58 - Profinet TECHNICAL DATA electrical ELECTRICAL CONNECTIONS Bus cover with 3x M12 connectors MOD NET P1 P2 POWER P2 Power P1 Specifications subject to change without notice. Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. General design As per DIN EN 61010-1, protection class III, contamina- tion level 2, overvoltage class II Supply voltage DC 7 - 30 V Current w/o load (typ.) 24V:

55 mA (ST) max; 65 mA (MT) Power consumption Resolution Singleturn 10 - 22 Bit Resolution Multiturn 12 Bit (total max.

resolution 34 bits) Output code Binary Profile/ protocol 1) Profinet IO Linearity ±½ LSB up to 14 Bit Absolute accuracy (typ.) ±35” Repeatability (typ.) ±10” Device data position, speed, acceleration, diagnostic data, alarms Device configuration resolution, total measuring range, preset, offset, direc- tion, scaling, residual value function, speed limits, accel- eration limits Updating of values / Cycle time 125μs / 31.25μs 1) Encoder profile 4.1 and 4.2 (according to the specification Encoder Version 4.1 Dec 2008 and Version 4.2 March 2017“ Pin Port 1 (P1) Supply voltage Port 2 (P2) 1 TxD+ UB in TxD+ 2 RxD+ N.C. RxD+ 3 TxD- 0 V in TxD- 4 RxD- N.C.

RxD- Shield Shield 1 Shield 1 Shield 1 1 shield connected to encoder housing Doc No: AE0027 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page Version 3 290719TK 2/8

Стр. 2

TECHNICAL DATASHEET Absolute Encoder AC 58 - Profinet DIMENSIONAL DRAWINGS Clamping flange Dimensions in mm Specifications subject to change without notice. Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Doc No: AE0027 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page Version 3 290719TK 3/8

Стр. 3

TECHNICAL DATASHEET Absolute Encoder AC 58 - Profinet DIMENSIONAL DRAWINGS (continued) Specifications subject to change without notice. Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Synchro flange Synchro flange Dimensions in mm Doc No: AE0027 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page Version 3 290719TK 4/8

Стр. 4