Hengstler Tico 731 Series Counter Datasheet (EN)

email: sales@impulseautomation.co.uk web: www.impulseautomation.co.uk tico 731 Flexible Counter Series in DIN size 24 x 48 mm high contrast 8-digit LCD display or brilliant 6-digit LED display different supply voltages available: – independent of mains supply with lithium battery or – maintenance-free and environmentally friendly with 12-24 VDC supply also high-voltage input 12-250 VAC/VDC up to 8 different functions for each standard model:

01 Pulse counter 02 Tachometer (1/min) 03 Time counter (display in hhhh:mm:ss) 04 Time counter (display in hhhhhh,hh) 06 Bidirectional position indicator 07 Counter with differential mode OVERVIEW Standard Models Type 1 Type 2 Type 3 Type 4 Type 5 Hardware Display 8-digit LCD 8-digit LCD 8-digit LCD 8-digit LCD 6-digit LED Supply voltage Lithium battery 12 – 24 VDC Lithium battery 12 – 24 VDC 12 – 24 VDC Nominal data 7 years NV-FRAM 7 years NV-Fram NV-Fram sra e y 0 1 > sra e y 0 1 > sra e y 0 1 > n oit n eter Active edge x x x x x negative or positive edge programmable Amplitude thresholds > 5 V, max. 30 V DC > 5 V, max. 30 V DC > 12 V > 5 V, max. 30 V DC > 5 V, max. 30 V DC max.

250 V DC/AC Counting frequency max. 7.5 kHz or max. 7.5 kHz or 20 Hz max. 7.5 kHz or max. 7.5 kHz or 0 3 d eta u n etta z H 0 3 d eta u n etta z H 0 3 d eta u n etta z H 0 3 elb a m m arg orp Hz attenuated Control inputs Reset and Keylock Reset Reset and Keylock Reset and Reset and application input application input Keylock external input programmable external input programmable programmable Mounting depth 32 mm 32 mm 60 mm 60 mm 60 mm Software Impulse counter x x x x x x x x x ni m /1 rete m o h c a T Time counter h : 1/100 h x x x x x Time counter h : min :

s x x x x x x x x C L P rof y alp sid la cire m u N x x ro ta cid ni n oitis o P bi directional C ounter with differential mode x Maintenance counter (on request) x Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Doc No: TTCC731 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 15-10-19 1 of 7

Стр. 1

Technical data tico 731 TYPE 1 LCD display Lithium battery COUNT: programmable count input for voltage signal or contact, frequency 7.5 kHz or 30 Hz RESET: reset input with contact (negative, 30 Hz) KEYLOCK: locking of the reset key short case TECHNICAL DATA Operating temperature -10 ... 50 °C Strorage temperature -20 ... +60 °C Electrical connection screw terminals, cable length Mounting with clamping frame Front panel cutout 45 + 0.6 x 22 + 0.3 mm Protection class (IEC 144) front side IP 54, terminals IP 20 Dynamic strength 10 m/s 2 (10 ...

150 Hz) according to IEC 68-T2-6 Shock stability 100 m/s 2 (18 ms) according to IEC 68-T2-27 General rating according to EN 61010-1, EN 50178, protective system II Pulse shape any square wave (1:1 for max. frequency) Input resistance Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz) Display 8-digit LCD, 7 mm Supply voltage Ub internal lithium battery Nominal data retention lithium battery: 7 years Inputs: Amplitude thresholds voltage input up to 7.5 kHz: 5 V, max 30 V DC Active edge negative or positive edge programmable Counting frequency programmable: 7.5 kHz or 30 Hz (attenuated for contacts) Control inputs:

Reset - manual reset via keyboard (can be locked) - external reset with static behaviour, active edge negative attenuated 30 Hz Reset lock via Keylock input, bridged to 0 V Counting frequency max. 7.5 kHz DIMENSIONS CONNECTION DIAGRAM Terminal assignment: tico 731 Dimensions in mm Connecting terminal Clamping frame ORDER NUMBER Model tico 731 0 731 1 * Option: with plug-in screw terminals * S Software function 01 impulse counter 02 tachometer (1/min) 03 time counter (hhhh:mm:ss) 04 time counter (hhhhhh.hh) Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. 0 1 Doc No: TTCC731 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 15-10-19 2 of 7

Стр. 2

tico 731 Technical data TYPE 2 LCD display DC supply voltage 12 – 24 V DC COUNT: programmable count input for voltage signal or contact, frequency 7.5 kHz or 30 Hz RESET: reset input with contact (negative, 30 Hz) short case TECHNICAL DATA Operating temperature -10 ... 50 °C Strorage temperature -20 ... +60 °C Electrical connection screw terminals Mmounting with clamping frame Front panel cutout 45 + 0.6 x 22 + 0.3 mm Protection class (IEC 144) front side IP 54, terminals IP 20 Dynamic strength 10 m/s 2 (10 ...

150 Hz) according to IEC 68-T2-6 Shock stability 100 m/s 2 (18 ms) according to IEC 68-T2-27 General rating according to EN 61010-1, EN 50178, protective system II Pulse shape any square wave (1:1 for max. frequency) Input resistance Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz) Display 8-digit LCD, 7 mm Supply voltage U b 12 ... 24 V DC* Current consumption DC 12 ... 24 V DC Nominal data retention nonvolatile memory > 10 years * Not to be connected to a DC-Network. For further information see manual. Inputs: Amplitude thresholds voltage input up to 7.5 kHz: 5 V, max. 30 V DC Active edge negative or positive edge programmable Counting frequency programmable:

7.5 kHz or 30 Hz (attenuated for contacts) Control inputs: Reset - manual reset via keyboard (can be locked) - external reset with static behaviour, active edge negative attenuated 30 Hz Reset lock programmable via front key Counting frequency max. 7.5 kHz, transmission rate for numerical display: 100 Hz DIMENSIONS CONNECTION DIAGRAM Terminal assignment: tico 731 Clamping frame Dimensions in mm Connecting terminal ORDER NUMBER Model tico 731 * Option:

with plug-in screw terminals * 0 731 S Software function 01 impulse counter 02 tachometer (1/min) 03 time counter (hhhh:mm:ss) 04 time counter (hhhhhh.hh) Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. 2 0 1 Doc No: TTCC731 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 15-10-19 3 of 7

Стр. 3

Technical data tico 731 TYPE 3 LCD display Lithium battery COUNT: count input for voltage pulses 12-250 V AC/DC (20 Hz) RESET: reset input for voltage pulses 12-250 V AC/DC (20 Hz) KEYLOCK: locking of the reset key long case TECHNICAL DATA Operating temperature -10 ... 50 °C Storage temperature -20 ... +60 °C Electrical connection screw terminals, cable length Mounting with clamping frame Front panel cutout 45 + 0.6 x 22 + 0.3 mm Protection class (IEC 144) front side IP 54, terminals IP 20 Dynamic strength 10 m/s 2 (10 ...

150 Hz) according to IEC 68-T2-6 Shock stability 100 m/s 2 (18 ms) according to IEC 68-T2-27 General rating according to EN 61010-1, EN 50178, protective system II Pulse shape any square wave (1:1 for max. frequency) Input resistance Min. pulse length 25 ms (20 Hz) Display 8-digit LCD, 7 mm Supply voltage U b internal lithium battery Current consumption DC lithium battery: 7 years Inputs: Amplitude thresholds high voltage input 20 Hz: 12 V, max. 250 V DC/AC Active edge voltage input positive edge Counting frequency 20 Hz Control inputs:

Reset - manual reset via keyboard (can be locked) - external reset with static behaviour, positive circuit Reset lock by means of bridge on the keylock input DIMENSIONS CONNECTION DIAGRAM Terminal assignment: tico 731 Clamping frame Connecting terminal Dimensions in mm ORDER NUMBER Model tico 731 0 731 3 Software function 01 impulse counter 03 time counter (hhhh:mm:ss) 04 time counter (hhhhhh.hh) Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. 0 1 Doc No: TTCC731 Rev:

001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 15-10-19 4 of 7

Стр. 4