Kaiyi LAN-WMBUS-E-VOC Temp/Humidity/VOC Device Installation Guide (EN)

Recommended mounting instructions: Always mount on an interior wall, e.g., hallway The sensor works best 180cm above floor Mount the device so the hole s at the front is on the right side Avoid heating/cooling sources Make sure that the UP symbol (s on the label olar radiation, lamps, pipe (located on the side) s, extensive airflow is pointing upwards , etc.) Mount the device with screws Step 1 : Turn the device upside down . Remove the mounting piece by pushing the two plastic pieces , marked by red circles , inwards and then lifting th

Стр. 2