Руководство по эксплуатации Kuhnke V65 Linear Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk V65 Series Linear Solenoid Push & Pull Type Order specifications Linear solenoid Design type Coil terminals Plug 1) Flying leads (10 cm standard length) Nominal voltage (standard voltage) 2) Perm. duty cycle under air cooled conditions (LK) 1) Suits plug-in socket 6.3 DIN 46247 2) Other voltages are available on request up to 230 V DC Weight: Complete solenoid: appr. 2500 g Armature: appr. 480 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: F (max. permissible temperature = 155 ° C) V65-N 24V DC 100% ED Accessories: Plug-in socket part no. Z801 and Z811 Metal case Terminal box:

6.3 DIN 46247 3) If solenoid is mounted directly onto a flat metal surface of at least 600 cm 2 , the duty cycle can be extended up to 1.3 x nominal rating 2000 %ED Document LNSV65/12 Revision 00 2 1000 800 F/N 300 5 Force vs. Stroke diagram F = f (s) 100 15 50 50 20 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 20 100 10 stroke s = 0 corresponds to armature in fully home position 0 5 10 15 20 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. V 65 – N – 24 V DC 100 % ED V 65 F N 24 100 % ED 100 50 20 15 5 % Perm. duty cycle (ED)3) 33 65 129 213 500 W Nominal coil power Pn

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk V65 Series Linear Solenoid Push & Pull Type ca.87 Dimensions given with armature in fully home position Direction of stroke 41,0 10,0 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm Document LNSV65/22 Revision 00 2 34,2 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier Plug-in socket Z811 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. 60 15 4 ca.75 20 +1 M8 Ø12H8 50 19 12 M6 65 30 ca.21 12B12 Ø25 24 6 28 90+0,7 40±0,4 160 ca.75 24 12B12 12B12 Ø25 6 Ø12H8 12 9,0 Ø 1 5,5

Стр. 2