xe25tten (EN)

Tips for Using the OmniBook XE and XE2 Configuring and Testing Your OmniBook • Configuring the OmniBook with the BIOS Setup Utility • Updating the OmniBook BIOS • Testing the OmniBook with HP Diag Tools • Using Power Management in Windows 95 • Using Enhanced Video and Dual Monitors (Windows 95 and Windows 98) • Expanding the Hibernate Partition When Adding RAM Recovering and Reinstalling Software • Recovering Software • Reinstalling the Online User’s Guide on an OmniBook XE • Reinstalling Service Pack 4a (Windows NT 4.0) Modem Information • Modem Dialing in France, Belgium, and Spain (OmniBook XE) • Modem Dialing in Spain (OmniBook XE2) • Modem Specifications Troubleshooting • Audio Problems • CD-ROM Drive Problems • Display Problems • Hard Disk Drive Problems • Heat Problems • Keyboard, Touch Pad, and Mouse Problems • Infrared Problems • Memory Problems • Modem Problems • PC Card (PCMCIA) Problems • Performance Problems • Port Replicator Problems • Power and Battery Problems • Printing Problems • Serial, Parallel, and USB Problems • Startup Problems 1

Стр. 1

Please check out our eBay auctions for more great deals on Factory Service Manuals: Thank you for purchasing this Factory Service Manual CD/DVD from servicemanuals4u.com. servicemanuals4u

Стр. 2

Specifications • OmniBook XE Hardware Specifications • OmniBook XE2 Hardware Specifications • Software System Resources 2

Стр. 3

Configuring the OmniBook with the BIOS Setup Utility The BIOS (Basic Input and Output System) Setup utility is a menu-driven utility that enables you to make changes to the system configuration and tailor the operation of your OmniBook to your individual work needs. The settings made in the BIOS Setup utility control the hardware and therefore have a fundamental effect on how the OmniBook operates. This page describes the BIOS Setup utility menus and options in detail. To run the BIOS Setup utility 1. Close all applications, then shut down Windows and restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3.

The pointing devices are not active in the BIOS Setup utility. Press the RIGHT and LEFT arrow keys to move among menus. Press the DOWN and UP arrow keys to move among options in a menu. Press F5 or F6 to move through values for the current option or press ENTER to display a list of choices. See the tables below for more information. 4. After you select the options you want, press F10 or use the Exit menu to exit the BIOS Setup utility. If the settings cause a conflict between devices during reboot, the system prompts you to run BIOS Setup, and the conflicting settings are marked. Main Menu Default 3 BIOS Revision Shows the current BIOS version. Detected automatically.

System Time Sets the time using 24-hour format. Values set take effect immediately. System Date Sets the date using mm/dd/yyyy format. Diskette A Sets the floppy drive type. Floppy disk drive type detected and set automatically. Primary Master Sets the hard disk drive type and various parameters. Hard disk drive detected and set automatically. Secondary Master Sets the CD-ROM drive type and various parameters. CD-ROM drive detected and set automatically. Display Device Switches between the built-in display (LCD), an external display (CRT) if attached, and both. LCD/CRT PS/2 Mouse Enables or disables the pointing devices.

Enabled ZV Port Sets whether zoomed video function is enabled, to connect from a PC card to a VGA controller. Enabled

Стр. 4