xe3 sm final (EN)

Removing the Floppy Disk Drive (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. • Keyboard cover (page 2-9). • Keyboard (page 2-11). • Display assembly (page 2-17). • Top case (page 2-19). • Hinge saddle set (page 2-22). 2. Release the drive’s ribbon cable from its connector on the motherboard. 3. Remove the two retaining screws. 4. Lift the floppy drive out of the notebook. HP OmniBook XE3 Removal and Replacement 2-31

Стр. 1

Please check out our eBay auctions for more great deals on Factory Service Manuals: Thank you for purchasing this Factory Service Manual CD/DVD from servicemanuals4u.com. servicemanuals4u

Стр. 2

Screws, M2.5x4 mm Figure 2-22. Removing the Floppy Disk Drive Reassembly Notes • Make sure the headphone PCA cable lies under the FDD bracket. 2-32 Removal and Replacement HP OmniBook XE3

Стр. 3

Removing the CD-ROM/DVD Drive (HP Authorized Service Providers Only) Required Equipment • Small Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. • Keyboard cover (page 2-9). • Keyboard (page 2-11). • Hard disk drive assembly (page 2-13). • Display assembly (page 2-17). • Top case (page 2-19). • Hinge saddle set (page 2-22). 2. Pull the CD-ROM or DVD assembly to the right, off of its connector and out of the notebook. Figure 2-23. Removing the CD-ROM/DVD Drive Reassembly Notes • Place the assembly so that its connector aligns with that on the motherboard, then gently press the assembly to the left and into place.

HP OmniBook XE3 Removal and Replacement 2-33

Стр. 4