6 ． EtherNet/IP Settings Precautions for Correct Use If the data size in tag data links of the Destination Device is an odd-numbered byte, use BYTE type to define, but not BOOL type. Additional Information For details on the command codes and response codes, refer to Accessing Communications Areas Using Variables with NJ-series Controllers in Section 2 Methods for Connecting and Communicating with External Devices - Communicating with EtherNet/IP - Memory Allocation of the Vision Sensor FH/FZ5 Series Vision System User's Manual (Communications Settings) (Cat. No. Z342). Additional Information With the Sysmac Studio, two methods can be used to specify an array for a data type.
After specifying, (1) is converted to (2) and the data type is always displayed as (2). (1)WORD[3]/(2)ARRAY[0..2]OF WORD In this document, the data type is simplified by describing WORD[3]. (The example above means a WORD data type with three array elements.) 11