Руководство по эксплуатации Hantek PP-90 — осциллографический проба (EN)

Made in China 1pcs 1pcs .2pcs 1pcs 1pcs 1200mm Performance Requirements 55g(max) 95mm Oscilloscope Probe Kit The PP-90 probe is a passive. low-impedance attenuation probe. The probe has been designed and calibrated for use on instruments having an input impedance of 1MΩ paralleled by 20pF. However, it may be recalibrated for use on instru- ments having an input capacitance of15 to 40pF. The probe incorporates a two position (1X, 10X) slide switch in the compensating network and cable length of 1.2 meters. The specification is as follows.

Table 1 ELECTRICAL CHARACTERISTICS Temperature -15℃ to 70℃ PP-90 Characteristic Performance Requirements Attenuation X1 X10 Input Capacity X1:85pF~115pF X10:18.5pF~22.5pF Oscilloscope 15pF~40pF Input capacity Input Resistance X1:1MΩ± 2% X10:10MΩ± 2% X1:DC-6MHz Band width X10:DC-80MHz Max input Conformed IEC-61010 CAT II Voltage X1: 200V DC+Peak AC X10: 600V DC+Peak AC Table 2 PHYSICAL CHARACTERISTICS Characteristic Performance Requirements Probe Body 95mm Coaxial Cable 1200mm Weight 55g(max) Standard Accessories 1. Probe Tip ........................ 1pcs 2. Ground Lead ...................1pcs 3. Marker Ring .....................2pcs 4.TipLocatingSleeve.................1pcs 5.

Adjustment Tool .................1pcs Note: Content of this document are subject to change without notice. Oscilloscope Probe Kit PP-90 Made in China Characteristic Performance Requirements Probe Body 95mm Coaxial Cable 1200mm Weight 55g(max) PP-90 Characteristic Performance Requirements Attenuation X1 X10 Input Capacity X1:85pF~115pF X10:18.5pF~22.5pF Oscilloscope Input capacity 15pF~40pF Input Resistance X1:1MΩ± 2% X10:10MΩ± 2% Band width X1:DC-6MHz X10:DC-80MHz Max input Voltage Conformed IEC-61010 CAT II X1: 200V DC+Peak AC X10: 600V DC+Peak AC

Стр. 1