User Manual of Product 1: Ryobi R18PD3-215GZ 18 V ONE+ ... (EN)

User Manual of Product 1: Ryobi R18PD3-215GZ 18 V ONE+ Cordless Combi Drill Starter Kit (2 x 1.5 Ah), Hyper Green

Стр. 1

User Manual of Product 1

Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.

Стр. 3

User Manual of Product 1

Safety, performance, and dependability have been given top priority in the design of your percussion drill. the risk of electric shock. Ŷ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. The percussion drill is intended to be used only by adults who have read and understood the instructions and warnings in this manual and can be considered responsible for their actions. INTENDED USE Ŷ If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

The percussion drill can be used for drilling into various material including wood, metal and plastics using a drill bit which has a shank diameter of less that 13 mm. It can also be used in hammer mode for drilling masonry and similar materials. PERSONAL SAFETY Ŷ Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Do not use the percussion drill for any other purpose not described above. GENERAL POWER TOOL SAFETY WARNINGS Ŷ Use personal protective equipment.

Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries. WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in HOHFWULFVKRFNїUHDQGRUVHULRXVLQMXU\ Ŷ Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

Save all warnings and instructions for future reference. The term “power tool’’ in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Ŷ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. WORK AREA SAFETY Ŷ Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Ŷ Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Ŷ Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Ŷ Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. Ŷ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Ŷ If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

ELECTRICAL SAFETY Ŷ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Ŷ Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. POWER TOOL USE AND CARE Ŷ Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Ŷ Do not force the power tool.

Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Ŷ Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Ŷ Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Ŷ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase Ŷ Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, 1

Стр. 4

User Manual of Product 1

changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. range may damage the battery and increase the risk of fire. SERVICE Ŷ Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Ŷ Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Ŷ Maintain power tools and accessories.

Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Ŷ Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. PERCUSSION DRILL SAFETY WARNINGS Ŷ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

SAFETY INSTRUCTIONS FOR ALL OPERATIONS Ŷ Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact hidden wiring . Cutting accessory or fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. Ŷ Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS Ŷ Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations. Ŷ Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury. Ŷ Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.

BATTERY TOOL USE AND CARE Ŷ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Ŷ Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal injury. Ŷ Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

Ŷ When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. ADDITIONAL SAFETY WARNINGS Ŷ Clamp workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage. Ŷ Ambient temperature range for tool during operation is between 0°C and 40°C. Ŷ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns. Ŷ Ambient temperature range for tool storage is between 0°C and 40°C. Ŷ The recommended ambient temperature range for the charging system during charging is between 10°C and 38°C. Ŷ Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. ADDITIONAL BATTERY SAFETY WARNINGS Ŷ Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.

7RUHGXFHWKHULVNRIїUHSHUVRQDOLQMXU\DQGSURGXFW damage due to a short circuit, never immerse your WRROEDWWHU\SDFNRUFKDUJHULQAXLGRUDOORZDAXLGWR ARZ LQVLGH WKHP &RUURVLYH RU FRQGXFWLYH AXLGV VXFK as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit. WARNING Ŷ Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified 2

Стр. 5