2. PRINTER SETUP ENGLISH VERSION EO1-33097 2.7 Loading the Media 2.7 Loading the Media (Cont.) 5. Close the Top Cover, then press the [FEED] button to check the media feeds correctly. FEED Button There are three issue modes available for this printer. CAUTION! To separate the printed media from the printer in batch mode, be sure to tear the media off at the Media Outlet or cut the media past the Strip Plate. If you tear the media off at the Print Head by mistake, be sure to feed one label (10 mm or more) with the FEED Button prior to the next issue. Failure to do this may cause a paper jam. Batch mode:
In the batch mode, the media is continuously printed and fed until the number of prints specified in the issue command has been printed. E2-11