HOME sm01005 INSTALLATION TOOL NAME PART NUMBER TORQUE ANGLE GAUGE SNAP-ON TA360 1. Place head gasket on rear cylinder with TOP marking facing up. NOTE Note the head gaskets are different for each head and are marked TOP. 2. See Figure 3-88 . Make sure tensioner guide is locked in head as shown. NOTE Figure 3-85. Install Valve Keepers Tensioner guide position is the same in both rear and front cylinder head. 3. See Figure 3-89 . Use Harley-Davidson Motorcycle Oil Figure 3-87. Check Valve Lash (typical) 3-44 2009 VRSC Service: Engine sm01061 Figure 3-86.Tighten Cam Journal Caps sm01062 20W50 to lubricate the four main head bolts. Lubricate the threads and under the bolt head.
sm01063 Figure 3-88.Tensioner Guide Position in Cylinder Head