2009 — Disassembly

HOME 3.10 UPPER AND LOWER CRANKCASE SEPARATION DISASSEMBLY TOOL NAME PART NUMBER sm01068 TRANSMISSION ASSEMBLY RETAINER TOOL HD-45301 ALTERNATOR STATOR COVER REMOVER/INSTALLER HD-45304 GASKET ALIGNMENT DOWELS HD-45340 1. Remove inspection (derby) cover. 2. See Figure 3-93 . Remove the 14 fasteners on the altern- ator cover in reverse order of torque sequence. 3. Install GASKET ALIGNMENT DOWELS (Part No. HD- 45340) in two of the alternator cover holes to steady the cover as it is removed. Figure 3-94. Alternator Stator Cover Remover/Installer 4. See Figure 3-94 . Using the inspection cover fasteners, position the ALTERNATOR STATOR COVER REMOVER/INSTALLER (Part No. HD-45304) as shown.

sm01069 5. See Figure 3-95. Remove the alternator cover. 6. Remove the clutch side crankcase cover fasteners in reverse order of torque sequence. See 6.2 CLUTCH. 7. Remove the clutch cover. 8. Remove clutch assembly. See 6.2 CLUTCH. sm00981 10 12 Figure 3-95. Remove Alternator Cover 14 8 1 sm01070 3 6 5 4 2 7 13 9 11 Figure 3-96. Remove Clutch Cover Figure 3-93. Alternator Cover Torque Sequence 3-46 2009 VRSC Service: Engine Figure 3-96. Remove C ator Cover Torque Sequence e: Engine lutch Cover Figure 3-93. Altern 3-46 2009 VRSC Servic