HOME sm04523 sm04507 Figure 6-18. Clutch Pack Assembled Correctly Figure 6-20. Assemble Clutch Pack 7. See Figure 6-18 . Verify clutch pack is fully seated as shown with no space visible between plates and carefully flip clutch pack over onto the opposite side. 9. See Figure 6-20 . Install four pressure plate springs over the threaded bosses on the pressure plate. Position the Figure 6-19. Spring Seat Washer and Location on Clutch Hub Figure 6-21. Distance Collar 8. See Figure 6-19 . Place a small amount of oil on each spring seat washer and install four pressure plate spring seat washers. 10. See Figure 6-21 . Install distance collar in clutch basket as shown. 6-8 2009 VRSC Service:
Transmission sm03665 lifter plate over the springs and loosely install fasteners to allow clutch plates to be moved for final alignment. sm03894