2009 — Installation

HOME sm03895 sm03899 Figure 6-24. Spring Screws 13. See Figure 6-24 . Using a cross pattern, tighten four spring Figure 6-22. Clutch Disc Aligning Spacer (HD-45654) screws to 9.7 Nm (86 in-lbs ). Figure 6-23. Insert Clutch Pack and Align Top Plate as Shown 14. See Figure 6-25 . Remove CLUTCH DISC ALIGNING SPACER (Part No. HD-45654). 12. See Figure 6-23 . Insert clutch pack and align top friction plate. Top friction plate must be indexed to fit in the top slot of the clutch basket. INSTALLATION TOOL NAME PART NUMBER GASKET ALIGNMENT DOWELS HD-45340 CLUTCH HUB HOLDER HD-48625 1. Remove clutch pack from clutch basket. 2. See Figure 6-26 . Install thrust washer. 3. See Figure 6-27 .

Slide clutch basket on to the input shaft. 2009 VRSC Service: Transmission 6-9 11. See Figure 6-22. Insert CLUTCH DISC ALIGNING SPACER (Part No. HD-45654) from the primary gear side. sm03898 sm03900 Figure 6-25. Remove Clutch Disc Aligning Spacer Tool (HD-45654)